Gear feeder, high speed and high precision feeding of coils, stamping automation
The gear feeder, also known as the cam feeder, is mainly used for high-speed and high-precision synchronous feeding, consisting of a housing, a first shaft (equipped with a splitter and an eccentric), a second shaft (equipped with a turret), a third shaft, and a Four shafts (equipped with a first roller and gear), a fifth shaft (equipped with a second roller and a second gear), a gear set (composed of third to sixth gears), a swinging seat, a swinging arm and a pressing device .
The gear feeder is connected to the punch output shaft through the first shaft to operate, the splitter shifts the turret to rotate the second shaft, and the first roller is rotated by the gear set.
The eccentric wheel drives the swinging seat to move up and down. When the swinging seat moves downward, the second roller and the first roller can rotate together through the second gear and the first tooth to perform feeding.
When the swinging seat moves upward, the second gear can be separated from the first gear, so that the second roller can be separated from the first roller to stop feeding, thereby ensuring high-speed and high-precision feeding of the gear feeder.
Products:
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 |
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 |
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 |
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |
| Coil I.D.(mm) | 8 | 8 | 508 | 508 |
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* |
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 |
| Work Roll Number(pieces) | upper 6
lower 5 | upper 6
lower 5 | upper 6
lower 5 | upper 6
lower 5 |
| Feed Roll Number(set) | 1 | 1 | 1 | 1 |
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 |
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic |
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ |
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) |
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 |
| 0.6 |
| 0.8 |
| 1.0 |
| 1.2 |
| 1.4 |
| 1.6 | 470 | 470 |
| 1.8 | 400 | 400 |
| 2.0 | 360 | 360 |
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
1. Pre-Sales Service:We have professional designers to meet the different requirement of our customers.
2. After-Sales service:We have an efficient team to meet 24*7 all day service.
3. Full-Service:Actively cooperate with customers to deal with problems in equipment using.
4. Engineers can provide service machinery overseas.
Product Tags:
|
|
Gear Coil Feeder Straightener High Speed And High Precision Stamping Automation Images
|
