Stamping automation, carbide die stamping finished product, punch feeder
In the automatic stamping production line, the feeder is usually installed in front of the stamping die. By feeding the feeding roller of the stamping strip, the feeding roller rotates by one angle during one movement cycle of the stamping, so that the stamping strip moves forward stepwise.
However, when the thinner thickness of the strip is punched, the strip itself is prone to bending, and it is easy to form an arch shape before the stamping die, which affects the feeding, so the feeder is installed behind the stamping die, in a cycle of punching. Inside, pull the stamping strip forward and move forward.
This type of feeder is also called the puller.
At present, most of the drawing machines used in the stamping industry are air feeders. To ensure the size requirements of the standard, it is necessary to make complicated adjustments to the punching machine: first loosen the fixing screws, adjust the cylinder stroke and then fix the screws; Sample tape.
Then use the measuring tool to measure the step size, use the projector to measure the actual size, find the error, adjust the punching machine again, and so on repeatedly, and finally fine-tune by hand, the precision can only reach 0.1mm.
In order to improve the efficiency of the customer's press line and the quality of the finished product, Ruihui Machinery recommends that the customer use the NC feeder when selecting the puller, which not only simplifies the operation process, but also improves the drawing accuracy to 0.01mm.
The pull-type NC feeder is easy and reliable to adjust, eliminating the need for mechanical adjustment, realizing the replacement of machinery with electricity and simplifying the mechanical structure.
In the production process, according to the set of molds in the touch screen pull parameters set the step and speed, set the belt parameters, the flat belt through the stopper wheel positioning through the puller bracket, press the start button of the machine The machine starts, and the pulling machine reciprocates to complete the pulling action.
Products:
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 |
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 |
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 |
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |
| Coil I.D.(mm) | 8 | 8 | 508 | 508 |
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* |
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 |
| Work Roll Number(pieces) | upper 6
lower 5 | upper 6
lower 5 | upper 6
lower 5 | upper 6
lower 5 |
| Feed Roll Number(set) | 1 | 1 | 1 | 1 |
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 |
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic |
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ |
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) |
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 |
| 0.6 |
| 0.8 |
| 1.0 |
| 1.2 |
| 1.4 |
| 1.6 | 470 | 470 |
| 1.8 | 400 | 400 |
| 2.0 | 360 | 360 |
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
1. Pre-Sales Service:We have professional designers to meet the different requirement of our customers.
2. After-Sales service:We have an efficient team to meet 24*7 all day service.
3. Full-Service:Actively cooperate with customers to deal with problems in equipment using.
4. Engineers can provide service machinery overseas.
Product Tags:
|
|
Stamping Automation Decoiler Straightener Feeder Carbide Die Stamping Finished Product Images
|
